Extremely high precision piezo jet valve
X+ jet has the most sophisticated robust valve mechanism design to ensure reliability of heavy duty usages but also has the most advanced software control capabilities in term of piezo movement behaviors to compensate parts wear and thermal expansion for consistent dispensing volume. X+ jet controller provides unique control capabilities of piezo stack enabling slow or fast open and close to avoid air bubble and satellite issues.
X+ JET DESIGN FEATURES
Valve Highest working frequency up to 3,000 per second
Dead point auto calibration capability for parts water and thermal expansion compensation
Tappet control by PID can ensure consistent tappet movements all the time
Builtin valve body cooling system can extend valve working life and dispensing stability
Fluid body has constant temperature control system for cooling or heating to keep fluid material under constant working temperature
Special coated nozzle is able to minimize flow resistance and provides smooth flow rate
Provide valve usage records monitoring valve life and abnormal conditions
Quick fluid body exchange design to minimize maintenance time
Low fluid level detection and warning capability
Suitable for wide range of fluid viscosity from watery fluid up to 1,000,000 mPas material
POWERFUL VALVE CONTROL FEATURES
Unique feature of combining 32 programmable parameters for a recipe to get the best dispensing result
Capability of setting variable dispensing frequency to synchronize with motion speed for consistent dispensing height through the complete dispensing pattern including turning and crossing areas
Programmable jetting trigger delay according to the dispensing process requirement and reducing valve set-up time
8 different recipes available for different applications to get the best dispensing result
Technical characteristics
Minimum ejection |
0.1nl/dot |
Minimum dot |
100um |
Applicable adhesive viscosity |
50~1,000,000mpas |
Pressure |
0.01~0.8 Mpa |
Dispensing frequency |
500Hz (1000Hz) |
Extra features |
Real-time action-solution mode (preset program glue volume change), selection pin (manual control of glue volume change) |
Valve operating mode |
Pulse mode (trigger pulse), counting mode (depending the path length), unlimited mode (triggered by external signal), external mode (application control) |
temperature |
Nozzle heated to 150 degrees (200degrees) |
Communication |
RS-232C |
Dimensions |
Valve 96mm(H) x 61mm(W) x 15mm(D) / Controler 70mm(H) x 270mm(W) x 230mm(D) |
※Minimum ejection, repeatability, and applicable adhesive viscosity depend on fluid properties.
※Maintenance cycle refers to the recommended maintenance cycle. Component replacement is recommended within the cycle.
Valve Highest working frequency up to 3,000 per second
Dead point auto calibration capability for parts water and thermal expansion compensation
Tappet control by PID can ensure consistent tappet movements all the time
Builtin valve body cooling system can extend valve working life and dispensing stability
Fluid body has constant temperature control system for cooling or heating to keep fluid material under constant working temperature
Special coated nozzle is able to minimize flow resistance and provides smooth flow rate
Provide valve usage records monitoring valve life and abnormal conditions
Quick fluid body exchange design to minimize maintenance time
Low fluid level detection and warning capability
Suitable for wide range of fluid viscosity from watery fluid up to 1,000,000 mPas material